There are currently no product reviews.
Filters and filter housings for sprayers
Complete filter assembly with the new 4-1/4 inch long filter screen. Assembly has 1 1/2 inch inlets (measure inside diameter). Uses C342106 O-ring.
Filter O-ring 94.6 mm x 5.3 mm. Fits C296022 Filters. Replace every 3 years or when O-ring feels loose or filter housing leaks.
82.1 mm x 3.5 mm filter O-ring for C296027 filter assembly.
170 mm (6-9/16 inch) 32 mesh stainless filter screen for C296022 filter assemblies. O-rings around outer perimeter of some filters not required and...
150 mm (5-15/16 inch) long stainless filter screen for C296027 filter assembly. 2-11/16 inch diameter.
Stainless screen measures 4-1/4 inches x 3-1/16 inches. Use filter O-ring C342106 to seal filter cup to filter body.
Screen measures 4 inches x 2-3/4 inches. Use filter o-ring C342105 to seal filter cup to filter body.
Old style 170mm long filter Screen measures 6-9/16 inches x 2-1/2 inches. Use C342106 filter o-ring to seal filter cup to filter body.
Filter body has 1-1/2 inch (inside diameter) inlets. and will accept a variety of filters (C111053 and C111104) and filter cups (C139155 and...
Slip ring holds filter and Cup to main filter body (C146077).
C146111 filter body has 1-1/4 inch inlets (inside diameter) and uses C342105 O-ring and C335073 slip nut to hold filter cup to filter body. Filters...
C335073 slip ring holds the filter and filter cup to filter body C146111.
Filter body measures 8 - 1/2 inches long x 5 inch inside diameter and has 1.5 inch inside diameter bsp inlet and outlet. Uses C111091 200 mm (8 inch)...
5 - 3/4 inch inside diameter slip ring for 200 mm filter body C146189. Use O-ring number C342231.
STRAINER BASKET/FILL BASKET LOCATED TOP OF TANK UNDER LID - MEASURES 11-3/4 INCHES WIDE X 9-1/4 INCH TALL.
126.4 x 7 mm O-ring for 8 inch filter. Measures aprox 5 inch inside and 5 - 1/2 inch outside diameter. Use with C335095 slip ring and C146189 filter...
Basket Strainer located under filler lid. Fits Tifone model Bravo and Vento- measures 7-7/8 inches wide x 9-1/4 inches tall.
200 mm (8 inch) long filter screen. Use O-ring C342231
Basket strainer / filler basket for sprayers with large fill hole. Measures 15-7/16 inches wide x 10-3/4 inches tall. Fits most Storm- Large Vrp-...
Filter cup measures 15/16 inch deep x 3 - 1/2 inch diameter. Uses C342106 O-ring and fits D146077 and D146077b filter housings.
Filter cup is 3 - 1/4 inch deep x 3 - 9/16 inch wide. Uses C342106 O-ring and fits D146077 and D146077b filter housings. Uses 170 mm filter number...
Filter Cup is 1 - 1/4 inch deep x 3 inch wide. Uses C342105 O-ring and fits C146111 filter housing
Filter Cup is 1 - 1/4 inch deep x 3 inch wide. Uses C342105 O-ring and fits C146111 filter housing. Has lip to hold O-ring in place.
Filter cup is 2 - 7/8 inch deep x 4 - 5/8 inch wide. Uses C342231 O-ring- C111091 filter screen- and fits C146189 filter housing.
Filter lid gasket for the Vanguard and Van-Air filters that use 3 wing nuts to hold lid to housing.
O-ring 73.03 x 3.53 mm fits between the 2 halves of the brass microfilters. The microfilters were mounted on bottom of sprayer manifolds on older...
9 x 3 mm O-ring
Parts page for Tifone filters used on Vanguard and Van Air models. We also have used parts available for this model filter- call or email us with...
10 x 1.5 mm Brass wing nut for filter lid
Filter lid for older model filters on Vanguard and Van Air sprayers
Filter screen for TAV.37b filters. Measures 11-1/2 inches long (100 x 290 x .8 mm)
Plastic inlet filter valve uses O-ring to stop water flow when filter is removed for cleaning
Inlet valve spring for Tifone filter measures 68 x 70 mm.
Inlet filter body for TAV.37b filters. Has three 10 x 1.5 mm studs.
37.47 x 5.34 mm O-ring used inside filter check valve is also used on the red drain plug on Vanguard and Van Air sprayers.
78.74 x 5.34 mm O-ring seals rear filter threads.
Knob for filter with 8 mm female threads
Plastic nut hold piston inside filter.
7.66 x 1.78 mm O-Ring seals the brass piston inside filter.
Brass piston inside filter assembly is designed to make sprayer stop spraying before it runs out of water for people that use hi-pressure rapid fill...
Aluminum bracket holds D146021 filter assembly in place.
Filter for older model sprayers with brass filter housing. Measures 5-1/8 inch x 2-3/4 inches.
Brass filter housing for older model sprayers. Has 3/4 inch bsp male intake and (2) 1/2 inch bsp male outputs- top is threaded for lid. Located near...
Brass filter lid for old style brass filter canisters used on early Vanguard sprayers.
O-ring measures 75.80 x 3.53 mm for use with the old style brass filter housing.
Copyright © 2018 Leinbachs Inc. Powered by Zen Cart