There are currently no product reviews.
Replacement parts for Bertolini pumps
Pump kit contains all rubber parts to overhaul pump. Includes diaphragms- o-rings- and oil seals.
95 mm (3 3/4 inch) diameter pump diaphragm used in Te-55 and Te-71 pumps. Replace before they blow and save time and money on repair and downtime....
Each cylinder head uses 2 of these o-rings to seal head to block. Order 6 - C342021 o-rings when replacing diaphragms on the Te-55 and Te-71 pumps....
Replace your old check valves when springs get weak and seats become pitted for top performance. Stainless valve and seat. Te-55 and Te-71 pumps use...
Cylinder head for Te-55 and Te-71 pumps.
Chamber body holds air damper membrane for TE-70 and TE-71 model pumps.
Adapter shaft bolts to rear of Te-55 and Te-71 pump crankshaft converting it to the Male x Male configuration needed for trailer model sprayers. Fits...
Use this crankshaft on Te-55- Te-71- and PA 530 pumps with C0060180 adapter for Trailer model sprayers 824 and 828. Has (3) 8 mm holes and (3) 10 mm...
Pump crankshaft for Te-55 and Te-71 is broached in the rear to accept 6 spline 1-3/8 fan gearbox shafts on direct drive 3-point air blast sprayers....
Piston Rings for Te-55 pumps. Each 55 mm diameter piston uses 2 piston rings.
Can be bolted to front cover of Te-55 and Te-71 to provide extra pressure outlet. Has 1/2 inch bsp male threads.
Rear spacer plate for Te-70 / Te-71 pumps. Can also be used as rear seal installation tool.
Valve cover for Te-55 and Te-71 pumps has 1/2 inch metric BSP hole tapped for output. Cross reference Bertolini 23.0204.09.2 Use part number C139164...
Piston pin retainer clip for Te-55 pump.
Hi pressure blow out fits in front cover of most Te pumps.
Cover for Te-55 and Te-71 pump valve. Part number C139164b is being furnished with brass plug until solid cover stock is refurbished.
Side mount for Te-85 to Te-110. Can sometimes be used to mount pump on trailers when front and rear of pump block is damaged.
Te-70 / Te-70 pump mounts
Ball bearing used in D-7 gearbox uses 2, one on each shaft next to oil seal. Te-55 and Te-71 pumps also use 1 - C154017 bearing per pump.
Piston wrist pin for Te-55 to Te-71 pumps.
Diaphragm retaining bolt for Te-55 to Te-71 pumps.
Front attachment ring holds rods to crankshaft on Te-55 and Te-71 pumps.
Rear attachment ring to hold connecting rods to crankshaft on Te-55 and Te-71 pumps.
$237.24... more info
Kit contains all rubber parts for overhaul of pump with Male to Male crankshaft used on pre 2010 trailer model sprayers. Includes diaphragms- air...
Kit contains all rubber parts for overhaul of pump with Male to Female crankshaft used on pre 2010 3-point lift models. Includes daiphragms- air...
Pump repair kit for TE-110 diaphragm pump for Trailer model sprayers with male x male shaft configuration. Similar to the older C349898 kit- but has...
Pump repair kit for Tifone 3-point model sprayers includes rubber parts needed for overhaul. The 3-point kit is for a pump with male x female shaft...
Use 2 per cylinder to seal head to block. Te-85 and Te-110 use 6 - O-rings- Te-130 use 8 - O-rings.
110 mm (4 5/16 inch) pump diaphram for Te-85- Te-110- Te-130- Te-150 pumps. Order C342126 O-rings to ensure proper seal. 85 to 110 pumps require 3...
Stainless valve and seat. Te-85 and Te-110 use 6 valves- Te-130 and Te-150 use 8 valves. Replace when seat become pitted.
Air damper for pump models TE-85 to TE-150
New style 2-piece air damper for TE-110 to TE-150 pumps.
Piston Ring for Te-71 pump. Each 62 mm diameter piston uses 2 piston rings.
Diaphragm retaining bolt for pumps Te-85 to Te-150.
Perforated metal backing plate for air damper. Fits Te-110 and 130 pumps.
Rear Cover for Te-85 and Te-110 pumps. Some scrapes and blemishes from shipping.
Pump Crankshaft for Te-110 pump used on trailer model sprayers has Male - Male shaft configuration (VD). Also Bertolini part number 37.0021.26.2
Te-110 pump crankshaft with male x female configuration (VM) for 3-point model sprayers. The rear of shaft is broached to accept the 1-3/8 inch...
Piston ring for 66 mm diameter pistons used on Te-85 (3-cylinder) pumps and Te-130 (4-cylinder) pumps. Each piston uses 2 piston rings.
Piston rings fit pistons with a diameter of 70 mm used in Te-110 (3- cylinder) and Te-150 (4-cylinder) pumps. Each piston uses 2 piston rings.
Front cover for Te-85 and Te-110 3-cylinder pumps
Brass valve cover for Te-85 through Te-150 pumps has 1/2 inch bsp female threads to accept metric ball valve. Cross reference Bertolini 35.0019.28.2
Brass valve cover for Te-85 through Te-150 diaphragm pumps. Solid cover will work on intake or output side of pump. Cross reference Bertolini part...
Brass output valve cover has 3/4 male BSP threads to be used as main supply to pressure regulator. Cross reference Bertolini 35.0018.28.2 For use on...
Oil expansion chamber / oil fill bowl for Te-110 pumps. Bertolini part number 35.0048.09.2
Expansion chamber oil sight glass for model TE-85- 110- 130 and 150 pumps.
Rebuilt pump mounts for front / rear of older model T-85 and Te-110 3 cylinder pumps.
Pump block for Te-110 model pumps. Bertolini part number 35.0023.09.2
Pump mounts for the new Tea/s 110 pumps. Has 2 bolt holes for block and 2 bolt holes for cylinder heads.
Old style Te-55, Te-70 pump mount used on 828 trailer model sprayers. Upgrade to C538135 if possible.
Side mount bracket for Te-130 pump.
Brass cylinder head for old style TE-85 to TE-150 pumps. Interchangeable with the C754015 aluminum heads.
Cylinder head for old style TE-85, TE-110, TE-130, and TE_150 pump. 35.0002.09.2
Cylinder head for the new TEA/S Tifone pumps has extra hole for mounting. Fits models 110, 130, and 150. 41.0111.09.2
Pump kit contains all rubber parts to overhaul pump on pre 2010 models. Includes diaphragms- air damper- o-rings and oil seals.
Pump repair kit for the new model TE-130 and TE-150 pumps. Similar to pump kit C349923 except it has the new style 2 piece air damper part # C349016...
$55.64... more info
Metal oil filler for Te-130 pumps. Has male metric threads to screw into top of pump.
Front cover (pressure side) for Te-130 4 cylinder pump.
Rebuilt pump mount for Te-130 pumps. Sometimes the output valve access holes have to be torched out or different bolts used on the exhaust ports as...
Pump mount for new TEA/S-130 and TEA/S-150 4 cylinder pumps. Has 3 holes for block and 2 extra holes for bolts running through cylinder heads. Pump...
66 mm diameter piston fits Te-130 and Te-85 pumps.
Expansion chamber oil cap for model TE-85- 110- 130- and 150 pumps.
Connecting rod for Te-130 to Te-150 pumps.
Copyright © 2017 Leinbachs Inc. Powered by Zen Cart