There are currently no product reviews.
Operates from 6 volt battery (included) and has 4-hour running time. NIOSH 23-C approved. Ideal for both greenhouse and fieldwork. An optional second...
This tractor-powered spray helmet is NIOSH 23-C approved and is ideal for both orchard spraying and fieldwork. Comes complete with 2 ZA2P3 filter...
ZA2P3 filter for organic vapors- pesticides- dusts- fumes- and mists. Fits all Kasco respirators. Niosh approved.
6 Volt - 6 amp hour battery for K80S-T8 helmet.
ZP3 - HEPA dust filter for all Kasco helmets.
ZA2P3 Filter for Prof-88 helmet
T-8 battery charger model BP-6. Automatically switches to maintenance charge once battery reaches 80% capacity.
12 volt T-9 Blower unit for K80S-T9 system. Niosh approved.
6 volt T-8 Blower unit for K80S-T8. Niosh approved.
Blue collar for all K80S helmets. Includes drawstring and hardware.
T-9 power cable has cigarette lighter type plug for power outlet and 2-prong plug at motor end.
Prof 88 - 12 volt replacement battery pack. For models with NC9-2 on power supply- the 9-2 stands for 9 batteries spot welded together and the 2...
Headband fits all K80S (T-1 to T-9)
Connects 6 volt battery to blower motor
Grid holds pre-filter (1307008) to main filter.
Old style Tractor socket with hinged cover.
Cigarette lighter socket with 28 mm mounting hole and rubber cover.
Breather hose from blower to helmet for K80S T-8 and T-9 models. Has quarter turn lock at blower motor end.
Clear visor for all K80S model (T-1 through T-9) Kasco helmets.
12 volt to 6 volt. Operate your 6 volt K80S-T8 from your 12 volt Tractor.
Tinted visor fits all Kasco helmets.
Blower motor has built in rechargeable ni-cad batteries. The batteries allow unit to run for short periods of time unplugged from tractor.
Prof-88 Headband with chinstrap.
Gasket fits all K80S helmet shells. Visor seats on gasket in closed position.
Over pressure relief vent for all Kasco helmets
Adapter fit T-9-T-5 and T-4 helmets allowing the use of two filters
Hinge washer to attach visor to helmet shell. 35 mm ( 1 1/3 inch) O.D. Use 1901008 Screw
Inserts into back of K80S helmets to connect air hose. Inspect this part for cracks if your hose does not stay in helmet.
Adjustable belt for K80S blower motor.
Six foot 12 volt power supply cable for T-1- T-4- and T-7 model Kasco systems. Can also be used as an extension cord on models with 1301006 tractor...
T-7 Blower motor has built in batteries that automatically recharge while using- so operator can disconnect from power source to re-fill sprayer....
$601.76... more info
Complete fiberglass helmet shell with adjustable headband- collar- and visor. Fits all K80S models T-1 through T-9.
Prefilter prolongs life of filter. Photo shows prefiter with grid attached to filter. Use 0705006 grid to attach to filter.
Plastic screw holds visor hinge to helmet shell.
Breather hose from blower to helmet for use with T-1- T-7- and older T-5 model K80S model helmets.
Socket with 2 pin connector to convert from old 4 pin design on older model Prof 88 model helmets.
Blue collar with built in exhaust vents for newer model Prof 88 helmet.
Replacement Ni-Cad battery pack for K80S T-7 blower motor.
6-volt motor with solder connectors for older model T-5 blowers.
Replacement electic motor with solder connectors for rechargeable T9-R blower assembly(0303076).
12 volt blower motor for Prof 88 model helmets.
12 volt power cable has fused cigarette lighter type plug end for power outlet and two prong plug at blower motor end. For use with K80S T9-R model...
Screw for older model K80 blower units
Make your own replacement cables. This 32 inch long cable will solder directly to 0701013 old style T-5 motor- or solder to a 1603003 to make a T-9...
12 volt T-4 blower motor (03030010) is older version of T-9 motor and uses 0309002 hose and 0309003 cable.
Twelve foot 12 volt power supply cable (0309/09) for older model T-4 and T-7. Used the same as six foot cable. Can also be used as extension cord for...
Short rivet kit (0604/03) for Kasco respirator helmets. Measures 5/16 inches long by 3/16 inches in diameter.
Long rivet kit (0604/12) for Kasco respirator helmets. Measures 3/8 inches long by 3/16 inches in diameter.
4 amp slow blow fuse. Measures 3/4 inch in length.
2.5 amp slow blow fuse. Measures 3/4 inch in length.
10 amp slow blow fuse. Measures 3/4 inch in length.
1502/04 backup washer for use with rivet kit if extra reinforcement is needed.
Back cover with input jack for T-1 and T-7 blower motors.
Prof-88 helmet power switch.
Close out prices on polyammide fabric- water resistant medium spray suits. One piece suit zips up the front. No longer available from Kasco.
Close out prices on polyammide- water resistant small spray suits. One piece suit zips up the front. No longer available from Kasco.
$398.36... more info
0601/13 Turbo-1AP filter for use in tractor cab installed filter system. Measures 25 1/2 inches long- 9 inches wide and 2 1/4 inches high. Sealed in...
Test air flow on your K80S-T8 and K80S-T9 with this easy to use gauge. Has floating ball and calibration mark showing 6 cubic feet per minute....
Test air-flow on your older model K80S-T1- T-5- and T-7 units. Make sure your blower motor and batteries are working properly. Unit has floating ball...
Prof-88 air flow gauge. Calibrated for use on the suction side of filter. Tests condition of motor- batteries- and dust filter to ensure safe...
Circuit board for K80S-T7 supports multispeed blower and controls automatic recharging of the ni-cad batteries.
Circuit board for older model T-1 with multi-speed blower.
Copyright © 2018 Leinbachs Inc. Powered by Zen Cart