There are currently no product reviews.
Adapter fit T-9-T-5 and T-4 helmets allowing the use of two filters
12 volt to 6 volt. Operate your 6 volt K80S-T8 from your 12 volt Tractor.
Test air-flow on your older model K80S-T1- T-5- and T-7 units. Make sure your blower motor and batteries are working properly. Unit has floating ball...
Test air flow on your K80S-T8 and K80S-T9 with this easy to use gauge. Has floating ball and calibration mark showing 6 cubic feet per minute....
Prof-88 air flow gauge. Calibrated for use on the suction side of filter. Tests condition of motor- batteries- and dust filter to ensure safe...
1502/04 backup washer for use with rivet kit if extra reinforcement is needed.
6 Volt - 6 amp hour battery for K80S-T8 helmet.
Prof 88 - 12 volt replacement battery pack. For models with NC9-2 on power supply- the 9-2 stands for 9 batteries spot welded together and the 2...
Replacement Ni-Cad battery pack for K80S T-7 blower motor.
Adjustable belt for K80S blower motor.
T-9 power cable has cigarette lighter type plug for power outlet and 2-prong plug at motor end.
Six foot 12 volt power supply cable for T-1- T-4- and T-7 model Kasco systems. Can also be used as an extension cord on models with 1301006 tractor...
12 volt power cable has fused cigarette lighter type plug end for power outlet and two prong plug at blower motor end. For use with K80S T9-R model...
Make your own replacement cables. This 32 inch long cable will solder directly to 0701013 old style T-5 motor- or solder to a 1603003 to make a T-9...
Twelve foot 12 volt power supply cable (0309/09) for older model T-4 and T-7. Used the same as six foot cable. Can also be used as extension cord for...
T-8 battery charger model BP-6. Automatically switches to maintenance charge once battery reaches 80% capacity.
Circuit board for K80S-T7 supports multispeed blower and controls automatic recharging of the ni-cad batteries.
Circuit board for older model T-1 with multi-speed blower.
Blue collar for all K80S helmets. Includes drawstring and hardware.
Blue collar with built in exhaust vents for newer model Prof 88 helmet.
Inserts into back of K80S helmets to connect air hose. Inspect this part for cracks if your hose does not stay in helmet.
Back cover with input jack for T-1 and T-7 blower motors.
ZP3 - HEPA dust filter for all Kasco helmets.
ZA2P3 Filter for Prof-88 helmet
ZA2P3 filter for organic vapors- pesticides- dusts- fumes- and mists. Fits all Kasco respirators. Niosh approved.
$398.36... more info
0601/13 Turbo-1AP filter for use in tractor cab installed filter system. Measures 25 1/2 inches long- 9 inches wide and 2 1/4 inches high. Sealed in...
4 amp slow blow fuse. Measures 3/4 inch in length.
2.5 amp slow blow fuse. Measures 3/4 inch in length.
10 amp slow blow fuse. Measures 3/4 inch in length.
Gasket fits all K80S helmet shells. Visor seats on gasket in closed position.
Grid holds pre-filter (1307008) to main filter.
Headband fits all K80S (T-1 to T-9)
Prof-88 Headband with chinstrap.
Breather hose from blower to helmet for K80S T-8 and T-9 models. Has quarter turn lock at blower motor end.
Breather hose from blower to helmet for use with T-1- T-7- and older T-5 model K80S model helmets.
$1,129.00... more info
Operates from 6 volt battery (included) and has 4-hour running time. NIOSH 23-C approved. Ideal for both greenhouse and fieldwork. An optional second...
This tractor-powered spray helmet is NIOSH 23-C approved and is ideal for both orchard spraying and fieldwork. Comes complete with 2 ZA2P3 filter...
Close out prices on polyammide fabric- water resistant medium spray suits. One piece suit zips up the front. No longer available from Kasco.
6-volt motor with solder connectors for older model T-5 blowers.
Replacement electic motor with solder connectors for rechargeable T9-R blower assembly(0303076).
12 volt blower motor for Prof 88 model helmets.
Tractor plug for older model 12 volt cables. Plugs into old style tractor socket 1301006.
Prefilter prolongs life of filter. Photo shows prefiter with grid attached to filter. Use 0705006 grid to attach to filter.
Short rivet kit (0604/03) for Kasco respirator helmets. Measures 5/16 inches long by 3/16 inches in diameter.
Long rivet kit (0604/12) for Kasco respirator helmets. Measures 3/8 inches long by 3/16 inches in diameter.
Plastic screw holds visor hinge to helmet shell.
Screw for older model K80 blower units
$601.76... more info
Complete fiberglass helmet shell with adjustable headband- collar- and visor. Fits all K80S models T-1 through T-9.
Close out prices on polyammide- water resistant small spray suits. One piece suit zips up the front. No longer available from Kasco.
Old style Tractor socket with hinged cover.
Cigarette lighter socket with 28 mm mounting hole and rubber cover.
Socket with 2 pin connector to convert from old 4 pin design on older model Prof 88 model helmets.
Prof-88 helmet power switch.
12 volt T-4 blower motor (03030010) is older version of T-9 motor and uses 0309002 hose and 0309003 cable.
T-7 Blower motor has built in batteries that automatically recharge while using- so operator can disconnect from power source to re-fill sprayer....
12 volt T-9 Blower unit for K80S-T9 system. Niosh approved.
Blower motor has built in rechargeable ni-cad batteries. The batteries allow unit to run for short periods of time unplugged from tractor.
Connects 6 volt battery to blower motor
Tinted visor fits all Kasco helmets.
Over pressure relief vent for all Kasco helmets
Clear visor for all K80S model (T-1 through T-9) Kasco helmets.
Hinge washer to attach visor to helmet shell. 35 mm ( 1 1/3 inch) O.D. Use 1901008 Screw
Copyright © 2017 Leinbachs Inc. Powered by Zen Cart